管理

Daikin V15A1RX-95 Pump

Features l Low noise ™ Low noise operation over the entire pressure range has been realized in each series. l High efficiency ™ Fluid temperature rise can be reduced due to the smaller power loss. This means that the tank can be designed in a small size. l High reliability ™ High responsivity, high stability, and long life make it possible to increase the reliability of the main machine. Model No. V15A1RX-95 Applicable fluid code No designation: Petroleum-based hydraulic fluid W: Water-glycol hydraulic fluid F: Phosphate ester hydraulic fluid Pump capacity 8: 8.0 cm3/rev 15: 14.8 cm3/rev 23: 23.0 cm3/rev … Read more

Daikin V15A1R-95 Pump

Features l Low noise ™ Low noise operation over the entire pressure range has been realized in each series. l High efficiency ™ Fluid temperature rise can be reduced due to the smaller power loss. This means that the tank can be designed in a small size. l High reliability ™ High responsivity, high stability, and long life make it possible to increase the reliability of the main machine. Model No. V15A1R-95 Applicable fluid code No designation: Petroleum-based hydraulic fluid W: Water-glycol hydraulic fluid F: Phosphate ester hydraulic fluid Pump capacity 8: 8.0 cm3/rev 15: 14.8 cm3/rev 23: 23.0 cm3/rev … Read more

Daikin-V8A1RX-20 Pump

Features l Low noise ™ Low noise operation over the entire pressure range has been realized in each series. l High efficiency ™ Fluid temperature rise can be reduced due to the smaller power loss. This means that the tank can be designed in a small size. l High reliability ™ High responsivity, high stability, and long life make it possible to increase the reliability of the main machine. Model No. V8A1RX-20 Applicable fluid code No designation: Petroleum-based hydraulic fluid W: Water-glycol hydraulic fluid F: Phosphate ester hydraulic fluid Pump capacity 8: 8.0 cm3/rev 15: 14.8 cm3/rev 23: 23.0 cm3/rev … Read more

Nachi UVN-1A-1A2-2.2-4-11 Pump

Energy efficient high performance All the performance of a vane pump, right from the low pressure range, is enhanced even further by eliminating the external drain and optimizing the pressure balance, creating a design that generates little heat. The result is a pump that contributes to the energy efficiency of the mother machine, as well as to process precision. Model No. UVN-1A-1A2-2.2-4-11   Pump Capacity in3/rev 0.49   Pressure Adjustment Range kgf/cm² (psi) 15.3 to 40.8 (217 to 580)   35.7 to 61.2 (507 to 870)   56.1 to 81.6 (797 to 1160)   No-load Discharge Rate gpm 50Hz 6.3 60Hz 7.6 … Read more

Nachi UVN-1A-0A2-1.5-4-11 Pump

Energy efficient high performance All the performance of a vane pump, right from the low pressure range, is enhanced even further by eliminating the external drain and optimizing the pressure balance, creating a design that generates little heat. The result is a pump that contributes to the energy efficiency of the mother machine, as well as to process precision. Model No. UVN-1A-0A2-1.5-4-11   Pump Capacity in3/rev .49   Pressure Adjustment Range kgf/cm² (psi) 15.3 to 40.8 (217 to 580)   35.7 to 61.2 (507 to 870)   56.1 to 81.6 (797 to 1160)   No-load Discharge Rate gpm 50Hz 3.1 60Hz 3.8 … Read more

Nachi UVN-1A-0A2-0.7-4-11 Pump

Energy efficient high performance All the performance of a vane pump, right from the low pressure range, is enhanced even further by eliminating the external drain and optimizing the pressure balance, creating a design that generates little heat. The result is a pump that contributes to the energy efficiency of the mother machine, as well as to process precision. Model No. UVN-1A-0A2-0.7-4-11 Pump Capacity in3/rev .49 Pressure Adjustment Range kgf/cm² (psi) 15.3 to 40.8 (217 to 580) 35.7 to 61.2 (507 to 870) 56.1 to 81.6 (797 to 1160) No-load Discharge Rate gpm 50Hz 3.1 60Hz 3.8   Over the years, we … Read more

Nachi PZ-6B-125-180E3A-20 Pump

Startup Precautions: Check to make sure that the rotation direction of the pump is the same as the rotation direction indicated by the arrow on the pump body. Air entering the pump or pipes can cause noise or vibration. At startup, set the pump discharge side to a no-load state, and operate the pump in the inching mode to remove any air that might be in the pump or pipes. To enable superior pressure and flow control, loosen the air vent when starting up the pump in order to release any air, and fill the inside of the solenoid with … Read more

Nachi PZ-6B-100-180E2A-20 Pump

Fluid: Provide a suction strainer with a filtering grade of about 100μ (150 mesh). Provide a return line filter of grade 10μm or less on the return line to the tank. (When the pump is used at a high pressure of 2000 psi or greater, a filter of 10μm or less is recommended.) Manage hydraulic operating fluid so contamination is maintained at class NAS10 or lower. Use hydraulic operating fluid when the operating ambient temperature is in the range of 32 to 140°F. Model No. PZ-6B-100-180E2A-20 Pump Capacity cu in/rev 10.98 Maximum Working Pressure psi 3045 Pressure Adjustment Range psi … Read more

Nachi PZ-6B-80-180E1A-20 Pump

Fluid: Use only good-quality hydraulic operating fluid with a kinematic viscosity during operation within the range of 20 to 200 centistokes. Normally, you should use an R&O type and wear-resistant type of ISOGV32 to 68 or equivalent. The optimum kinematic viscosity during operation is 20 to 50 centistokes. The operating temperature range is 41 to 140°F. When the oil temperature at startup is 41°F or less, run the pump at low pressure until the oil temperature reaches 40°F. Provide a suction strainer with a filtering grade of about 100μ (150 mesh). Provide a return line filter of grade 10μm or … Read more

Nachi PZ-5B-64-130E3A-11 Pump

Handling: Keep the clamping length of couplings and pump shafts at least 2/3 the length of the coupling width. Use a sufficiently rigid pump mounting base. Set pump suction side pressure to −4 psi or more (suction port flow velocity less than 6 ft/sec). Raise part of the drain piping so it is above the topmost part of the pump body, and insert the return section of the drain piping into the hydraulic operating fluid. Also, observe the values in the following table in order to limit the drain back pressure to 14.5 psi. Model No. PZ-5B-64-130E3A-11 Pump Capacity cu … Read more

Contact Us Now!